Feed Mechanism

Cassel inspection systems have three primary feed types: Conveyor Feed, Gravity Feed and Pumped Feed.

Metal Detector COMBI-TU

For transformer- and paperboards, ultrahigh sensitivity Categories: Metal Detectors, Conveyor Feed, Nonwoven, Transformer Board Tags: Conveyor, Foreign body inspection, Metal detection.

Description..

Datasheet: SHARK® COMBI-TU

The METAL SHARK® COMBI-TU is a metal detection system based on the latest technologies. It is used for inspection of:

transformer boards
paper boards
textiles

The metal detector is constructed as a multi-segment sensor, with sensor plates underneath and above boards to be inspected. The total detection zone of the detector is thus divided into several single zones, each of them about 365 mm wide. The sensor is available for various paperboard widths, such as 1,000 – 5,000 mm. The net aperture height is 28 mm. The paperboards shall move through without touching the sensors. Maximum transformer board thickness is recommended to be 8 mm, with a maximum board bending of 20 mm between the lowest and highest.

Available digital controllers: METAL SHARK® 2A

Features & Benefits of Metal Detector COMBI-TU

Metal Detection Levels: Ferrous sphere 0,6 mm Magnetic stainless steel sphere 0,7 mm Non Ferrous sphere 0,8 mm Non magnetic stainless steel sphere 1,0 mm

Available detection widths: 1.000 – 5.000 mm (3.3 – 16.6 ft)