Waxing
Waxing Unit
The waxing unit consists of rotating cylindrical brushes for product waxing. The brushes are outfitted with natural horse hair. Their number and size depend on the product type and the customer’s specifications. A special spraying system with nozzles is situated above the brushes. This spraying system is adjusted through an electronic dosing pump to achieve a precise flow rate and maximize economy. The rotation speed of the brushes is adjusted by a suitable inverter. A drainage tank is located under the brushes, to collect excess water and fruit residue.
The products enter the machine through the feeding area, after which they are subjected to waxing by a brush/wax spraying system.
The machine frame is made of plain steel, while the parts which are in contact with the fruit are made of stainless steel. The stands are height adjustable.
Conveying Belts
Double-in feed belt
The double-feed conveyor belt is a versatile machine with a wide use possibility since it can be a part of almost every fruit and vegetable processing line. Its objective is to divert incoming fruits and vegetables into two exits, for further processing according to the operator’s needs.
The machine is designed to be a part of a more complex processing line for packaging and/or sorting products. The machine is run through switches on the electric board. Part movements are automated.
The machine consists of the following:
- Product entry point.
- Conveyor belts.
- Product exit points.
The normal work cycle is as follows:
- The products are fed onto the conveyor belts through the entry point.
- Depending on the operator’s needs, each exit can be blocked with a guiding bar, if for any reason one of them is not to be used.
The products exit through the ends of the conveyor belts for further processing.
The external parts of the machine are constructed by assembling painted structural steel framework and plates, welded and/or bolted. The machine’s stands are height adjustable.
